home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-19
/
adidrv.zip
/
HPGL2.HLP
< prev
next >
Wrap
Text File
|
1991-02-10
|
2KB
|
42 lines
Call with HPGL2 [options]
Options:
-Ixx: where xx is the hex interrupt vector.
0x7b is the default.
-Cx: where x is the serial port 1 or 2.
COM1 is the default (Not Recommended!).
-Lx: where x is the parallel port 1, 2, or 3.
LPT1: is the default.
-Ffilename: plot TO a file, where filename is the name of the file.
Default is to plot directly to the plotter.
-P: No PageAdvance after plot.
Default is to send a page advance after every plot.
-E: Disables the paper cutter.
-V: Pen plotters need pen velocity.
Default is for line weights (electrostatic plotters).
-R: Lets you make a number of extra copies.
Default is one copy.
-M: Change plotting units to metric.
Default is inches.
-Z: LaserJet III only.
Use only with the LaserJet III printer.
-J: PaintJet XL using a Serial port.
Not needed if you use the parallel port.
-S: For use with ACAD Scripts or AutoSketch.
AutoSketch hangs if HPGL2 is installed w/o using -S!
-A: For use with a printer/plotter RAM buffer.
Removes error checking at the port.
-?: or -H: Prints this message.